Skip to main content

Patented & proven solutions

Damp? Musty? Humid? Get a dry, healthy crawl space today!

Get a free estimatewhite arrow

7 Tips to Winterize Your Basement or Crawl Space on a Budget

A frozen downspout and snow piled near a home

Cold weather causes frozen downspouts, burst pipes, foundation cracks, and other problems that can negatively impact the basement or crawl space.

Wintertime means cold temperatures, and in many places, snow and ice. No matter where you live, it's important to protect your home against winter weather. Winterizing basement and crawl space areas can reduce energy costs and protect against damaging and potentially costly problems, including water damage.

The good news is winterizing your basement or crawl space doesn't have to be expensive. With a combination of tasks you can do yourself and others that are better suited for a professional, you can make the job work for your budget. Below are several things you (or a professional) can do to protect your home this winter.

  1. Clean out gutters and extend downspouts

    While gutters aren’t part of the basement or crawl space, clogged gutters are a common cause of water in the basement or crawl space. When gutters clog, water can spill over the gutters and pool next to the house. When the ground next to the foundation becomes saturated, hydrostatic pressure can force the water into the basement or crawl space through cracks or gaps.

    Recommendation:

    • Clean the gutters twice a year to remove leaves and debris; plan to clean them in the spring and the fall. Consider cleaning them more often if there are pine trees or lots of foliage around the home. Cleaning the gutters before winter helps prevent the build up of ice and water that can damage the roof and siding. There are several options for cleaning gutters, but most ways require special equipment and almost all of them require you to climb a ladder. If this doesn’t sound appealing, hire a contractor to clean the gutters.
    • Add gutter guards to prevent leaves and debris from accumulating in the gutters.
    • Extend downspouts at least 4 feet away from the house to prevent the water from getting into the basement or crawl space. Hire a waterproofing professional to install downspout extensions if needed.
  2. Seal and insulate the rim joist

    Rigid foam insulation between floor joists in a basement

    Rigid foam is added to the rim joist to stop air leakage.

    The rim joist cavities are a major source of air leakage and heat loss. In the winter, condensation on the cold rim joists can cause mold and rot. Rim joists are located around the perimeter of the basement, on top of the basement walls and below the floor joists. The rim joist supports the weight of the floor resting on the joists. The size of the rim joist cavity depends on the footprint of the house.

    Recommendation:

    There are two options for insulating the rim joists: spray foam or rigid foam. Whichever insulation product you choose, proper application is important to prevent air leakage.

    • For DIY applications, two-component polyurethane foam kits are available at most hardware stores; expect to pay about $350 for a 200 board foot kit. An advantage of using spray foam is that it’s an “all-in-one” product that both seals air leaks and insulates. Be sure to wear protection when applying spray foam. Rigid foam is typically less expensive than spray foam, but it’s more difficult to install.
    • If you’d rather leave the job to a professional, hire a basement or crawl space repair contractor to insulate the rim joists.
    • If you’re considering adding insulation in other areas of the home at the same time, hire a professional insulation contractor.
  3. Fix foundation cracks

    Cracks in the foundation allow water from snow and melting ice to get inside the basement or crawl space. Freezing and thawing can make small cracks bigger. Foundation cracks should be repaired to keep out water and moisture and prevent damage and mold. Crack injection is a common short-term DIY repair method. However, over time, most DIY injection repairs fail due to poor adhesion or a broken seal. In the winter, freezing and thawing can cause movement of the foundation. When this happens, the epoxy can crack.

    Recommendation:

    • To repair minor cracks in the basement walls, hire an experienced basement waterproofer. The FlexiSpan basement wall crack repair system uses flexible sealant, porous foam, and an impermeable membrane that flexes to maintain a seal over the wall crack.
    • For cracks more than 1/4-inch wide or bowing walls, have them inspected by a qualified foundation repair contractor. Many of the experts in the Basement Systems network provide foundation repair services in addition to winterizing and waterproofing.
  4. Insulate metal pipes

    Exposed pipes in unheated areas, such as the basement or crawl space, are vulnerable to freezing and bursting during the winter. This can lead to expensive water damage and mold. In houses with a boiler room, the heat from uninsulated pipes is lost through the cold concrete walls.

    Recommendation:

    • Wrap pipes in foam insulation to keep the pipes from freezing, sweating, and dripping. Insulate the pipes in a boiler room to prevent the heat from being lost to the outside. Pipe insulation is available at most hardware stores; expect to pay $2-$8 for 6 feet of tubular foam pipe insulation. You might consider hiring a qualified insulation contractor to ensure proper installation.
    • Consider insulating the foundation walls to prevent heat loss to the outside during cold weather. Most experts in basement and crawl space repair can insulate foundation walls; check with your local Basement Systems contractor.
  5. Seal basement windows and crawl space vents

    In the winter, leaky basement windows can let in cold air, melting snow and ice, and moisture. Open crawl space vents do the same. If there are exposed pipes, this can increase the risk of the pipes freezing and bursting.

    Recommendation:

    • Seal gaps around basement windows with caulk to prevent air leakage and water intrusion.
    • Add window wells to help keep water and moisture away. Consider a window well cover to prevent clogs from snow, leaves, dirt, and other debris.
    • Properly seal crawl space vents to keep cold air out and prevent frozen pipes. In addition to closing crawl space vents, a vapor barrier and insulation should be added to protect the crawl space against moisture and temperatures year round.
  6. Seal ducts

    Exposed ductwork in an uninsulated basement or crawl space will be the same temperature as the temperature of the air in the unconditioned space. In the winter, warm air inside the ducts is cooled by the cold ducts. This makes the furnace run longer and work harder to warm up the air. Leaky ducts are one of the most significant causes of high heating and cooling bills.

    Recommendation:

    • Seal and insulate ducts in the basement or crawl space to improve comfort, save energy, prevent condensation issues, and improve indoor air quality.
    • Consider insulating the foundation walls if both the ducts and walls are uninsulated. In the winter, water pipes in an uninsulated basement or crawl space can freeze and burst if the ducts are insulated since there’s no heat source to prevent the pipes from freezing in cold weather. Hire an experienced insulation contractor to seal and insulate ducts and add wall insulation.
  7. Prevent sump pump discharge from freezing

    IceGuard device installed on a sump pump discharge hose

    The IceGuard device protects against flooding caused by a frozen sump pump discharge hose.

    It’s normal for a sump pump to run in the winter when water from melted snow and rain accumulates in the sump pit. When it does, it’s important for the discharge line to be clear to allow the water to exit the basement or crawl space. In the winter, buried discharge lines can clog with snow and ice, preventing water from flowing through the hose. If the sump pump discharge hose freezes, the sump pump is forced to work harder and can overheat and fail.

    When the temperatures start to drop, one of the most common questions from homeowners with a sump pump is “How do I stop my sump pump discharge from freezing?” Disconnecting the sump pump hose is an option, but forgetting to reconnect it can result in a flooded basement or crawl space.

    Recommendation:

    • Add an “anti-freeze” device, such as the IceGuard discharge line protection system, to allow water to exit the discharge line even if it freezes or clogs. Ask your local waterproofing contractor about adding IceGuard to your basement or crawl space waterproofing system.

Find a professional to help winterize your basement or crawl space

Based on your climate, knowledge, and DIY capabilities, these tips can help you create a list of winterizing to-dos. If you need professional help, your local Basement Systems dealer can help with rim joist and wall insulation, downspout extensions, minor crack repairs, sealing basement windows, crawl space vents and insulation, and adding discharge hose protection. Contact your local basement repair or crawl space repair contractor to schedule a free consultation and estimate.

get a free estimate
Find Your Local Contractor

All products and services are provided exclusively by local contractors within the Basement Systems Network.

To ensure professional installation and superior service we carefully created an international network of over 350 trusted basement contractors.

Featured States: Alabama, Georgia, Kansas & Michigan

Find A Dealer Near You!

  • Or select a state or province to get started
  • USA
  • Canada
ALAKAZARCACOCTDEDCFLGAHIIDILINIAKSKYLAMEMDMAMIMNMSMOMTNENVNHNJNMNYNCNDOHOKORPARISCSDTNTXUTVTVAWAWVWIWY
Find Local Dealer
Free Quote