Before & After Photos

When it comes to chimneys, most people worry about bats or birds moving into them, but our All-Dry of the Carolinas team worry about something else entirely. Once a chimney ages, it will settle according to the foundation of the earth. Gravity takes over and begins to cause damage to the structure. In this case, the chimney had started to tilt away from the home. But with the help of Push Piers our All-Dry of the Carolinas’ team was able to give the chimney the extra strength it needed!

Basements can have a lot of different problems, all of which can be quite serious. The most common problems we see in basements are bowing walls and water intrusion, often around the joint where the floor and wall meet. These are both serious issues that should be taken care as soon as possible. Many of the homes we work on have both of these issues at the same time, such as the home that is shown in these photos.

The first photo shows off one of the basement walls that was dealing with both water intrusion and had some cracks had started to develop. Our System Design Specialist inspected the entire basement area and came up with a solution that would take care of both the water intrusion and the cracking along the walls. 

The second picture shows the same wall after our crew came out to the home and installed both our CarbonArmor Straps and WaterGuard drainage system. The CarbonArmor is installed in order to prevent any further bowing and cracking on the wall. The WaterGuard was installed on the floor of the basement against the wall. It leaves a small gap between the floor and wall, which allows water to get through. We also installed a sump pump in this basement to pump out any and all water that gets into the basement. 

CarbonArmor Fabric is a product that we don't get to use that often, so when we do get to use it, we like to show it off! CarbonArmor is made up of carbon fibers that are woven together. Many people have heard of carbon-fiber before, but don't always know what it is or what it can do. Carbon fiber is an excellent product to use (especially for a job like this) because its immense strength but also because of its weight, or lack of it. Carbon fiber is 10 times as strong as steel, however, it is 5 times lighter.

The "before" photo shows what the basement looked like before the CarbonArmor Fabric was installed. While you are not able to see any visible bowing on this particular wall, you can see some stair-step cracks on the back wall. These cracks are almost always a sign of bowing walls or another type of foundation issue.

The "after" photo shows off the installed product, CarbonArmor Fabric. As you can see, there are four strips in this small section of the basement, over twenty were installed in total. While there is not that much of a visual difference between these two pictures, just having these 4 small strips will do this homeowner a world of good. Let's not forget about what was mentioned earlier, carbon fiber is 10 times stronger than steel. Would you rather have a small strip of carbon fiber or a steel beam that is much weaker?

This customer had a huge problem. They were in desperate need of some kind of foundation support system to fix these huge cracks in their home. Our crew installed our FSI Push Pier System in order to fix these and it really did the trick!

The "before" picture shows a huge crack in the customer's garage. We see small cracks which can cause a problem, but we hardly see cracks that you can see through to the outside!

The "after" photo shows the same crack after we installed our Push Piers and sealed the crack. You can see just how big of a difference the push piers can make! The best things about our products are that they give each and every one of our customers peace of mind after they are installed! This goes for both preventative work and work after the problem has already arisen.

This before and after is a little different because the work has already been completed and the crack has already been brought back towards its original position. This before and after is more to show the process after the push piers are installed, rather than the difference that they made in closing the crack (which was a huge difference). 

The "before" photo shows off the two installed push piers that had to be installed under this patio. The crack can also be seen at the top of the picture, and as you can see it is essentially completely closed up. Our crew had carefully removed a portion of the concrete that was just big enough for them to dig out the area and install the push piers. The great thing about push piers are that they are almost always completely in the ground once installed.

The "after" photo shows the same area but after the area had been filled back in. The crew filled the holes back up with the dirt they had removed and then began mixing concrete to cover the area. The concrete was poured and smoothed out, making it as good as new! Of course the old and new concrete will look a little different, but the most important part is that this homeowner doesn't have to worry about any further damage to their wall.