Before & After Photos

A new customer in East Brunswick, NJ contacted our Nuisance Wildlife division after seeing a raccoon come out of her attic! When we arrived, the homeowner showed us where she saw the raccoon, which was right by the soffit at the peak of the home. As we got closer to investigate, we saw that the soffit area was damaged and found raccoon paw prints near the area. This was how to raccoon was able to invade the home.

We temporarily sealed off the access point with hardware cloth and then installed a nose cone that is attached to a Comstock device over it. The nose cone will safely guide the raccoon into the Comstock device. The Comstock is a two-gaited, heavy-duty device that features super-strong coil springs that powers the trap door. The door locks into place which prevents the raccoon from escaping. We also set up several baited devices nearby. 

A short while later, we successfully retrieved the raccoon and relocated it to a new, humane environment. We then installed sturdy metal flashing over the access point to prevent reinfestation.

Atlantic City Electric was having a major problem with sparrows and starlings in their warehouse. We decided on using one of our favorite bird deterrents, bird netting to solve this problem for our client. These birds will stay away!

After spotting a groundhog run across his yard and go underneath the deck in the backyard, this customer in Green Brook Township, NJ called our Nuisance Wildlife Division for help.

After inspecting the back deck, we noticed an exposed area on both sides of the steps that the groundhog was using to harbor underneath the deck. There was also a wide gap on the side of the deck too. First, we installed Pest-Blok on the long side of the deck. Pest-Blok is sturdy material that undergoes a silicone-protected polyester coating process that makes it last longer and guards the area against groundhogs and all other nuisance wildlife. Next, we installed Dig Defense® around the entire deck except for one area. Afterward, we installed a heavy-duty retrieval device over the exposed opening and enclosed it with a portion of Dig Defense® in order to safely retrieve the groundhog.

We also placed a baited device nearby. Dig Defense® is a below-ground fence system that is 15 inches deep, 4 feet across, and protects structures against invasive nuisance wildlife and feral animals. Once we safely retrieve the groundhog, we will relocate it to a new, humane location and install another portion of Dig Defense® over the opening.

Recently, I was dispatched to a residence in South River, NJ. The homeowner was having a problem with yellow jackets. These wasps with their distinctive yellow-black coloration are one of the most territorial, aggressive stinging insects we come across. They seem almost anxious to sting at the slightest provocation.  

Although yellow jackets often nest outdoors in rodent burrows and other cavities, sometimes they decide to build nests inside homes. Decks, eaves, soffits, gutters, and even holes in brick are all potential yellow jacket nesting sites. Here, the wasps found an opening of a roof dormer soffit. The homeowner realized he had a problem because he was hearing buzzing and light scratching/clicking sounds in his upstairs ceiling. These wasps, as many wasp species, will chew on wood because cellulose makes for great nesting material. They are powerful enough to chew through drywall. These were some of the sounds that the homeowner was hearing. By the way, don’t knock on the drywall. It may be so paper thin that you’ll make a hole in it!

Upon arrival, I immediately inspected the exterior and observed yellow jackets entering and exiting the dormer soffit. I also saw a paper hood protruding out of the soffit that was clearly part of their nest. Yellow jackets build paper nests that are completely surrounded by a paper envelope. This paper-like pulp is a mixture of chewed wood fibers and their saliva. Inside, I inspected the upstair ceiling and found that the moisture from the nest had soften the sheetrock.

It was time to treat the nest. Because of the aggressive nature of these wasps, i don’t take any chances. I put on my protective suit with a hat and veil to protect me against any insect stings. When yellow jacket nests are first treated, you are often “greeted” by a swarm of angry, aggressive wasps. A individual yellow jacket can sting multiple times, so f a nest is disturbed you can be facing dozens of painful stings. For obvious reasons, active yellow jacket nests, especially those built in challenging locations, are not DIY homeowner projects. 

I climbed on the roof and used an extension pole sprayer so I could keep as safe a distance as possible from the nest, and injected a dust into the soffit opening. The dust will be shared with all of the members of the nest and it won’t take long for the queen and the rest of the colony to be eliminated.

A homeowner in Jackson, NJ had an unsuspecting visitor take up residency in her home — a raccoon! She called our office for help and we were sent out to find out how the raccoon got into the attic and safely remove it.

Moments into our inspection, we noticed that a portion of the soffit was ripped open and there was raccoon hair stuck in the opening. This was the main access point. We temporarily enclosed the area with hardware cloth and installed a one-way device over the access point. The one-way device allows the raccoon to safely leave the attic but prevents it from getting back in. We also placed several baited devices nearby.

A short while later, we safely retrieved the raccoon, relocated it to a new, humane environment, and disinfected the attic area. Lastly, we sealed up the access point with sturdy metal flashing to prevent reinfestation.