Before & After Photos

An East Brunswick homeowner contacted Crawl Space Solutions by Cowleys to enlarge their existing crawl space opening. Although we specialize in converting problem-ridden vented crawl spaces into clean, dry encapsulated crawl spaces, our technicians have the experience to handle virtually any crawl space renovation work. This Brick homeowner was faced with a serious issue: His current crawl space opening was so small that a person of normal dimensions could not possible fit through it.

We installed a new crawl space entrance way by removing the concrete block, installing a new wood frame, and making a custom door for easy access.
We also custom-made a vent cover that we installed into one of our vent blockers. This was one of our smaller jobs, but for this homeowner, it was an important one. After all, a homeowner must be able to have ready access to their crawl space. Crawl spaces are prone to all sorts problems, from moisture to mold to insect and wildlife infestations. It is critical to have access to this often-neglected area of the home to periodically inspect for problems and to make the necessary repairs.

Here are some “before and after” exclusion pictures that I had taken as part of a job to resolve a mouse infestation for a homeowner in East Brunswick, NJ. When dealing with rodents, it is critical to determine how they are gaining access inside the home. You can go ahead and set up bait traps and apply applications to deal with the mice inside the home, but to permanently resolve the problem and prevent re-infestations, you need to locate the entry points used by the mice to gain access into the home. Sometimes you know they are actual entry points because of nearby rodent activity near the gap or crack. For example, if you find tiny, dark pellet-like droppings or smelly urine near the gap or crack, you are pretty much guaranteed that some mice availed themselves of the opening to gain access into the home. Other times during the inspection, the technician may find potential entry points that need to be sealed. 

Finding the gaps and cracks can sometimes be a challenge. Mice are tiny creatures and they can fit through a hole the size of a dime. A good inspection requires a thorough visual of the home’s entire foundation. Often, mice enter into the crawl space or attic and then use wall voids to maneuver their way around the home, eventually making their way to the kitchen to forager for food. Sometimes, the gaps are small and it takes a lot of detective work to find them. However, there are occasions where you’ll find a huge gap that for a mouse would be the equivalent of the Holland tunnel! That was the case here. With this home, there was a huge gap around a utility pipe entering the home. The gaps around pipes and wiring entering the home are always treated as one of the “usual suspects” to check when looking for rodent entry points. Here, you can see the large gap around the pipe.

To seal this gap, I filled it with chew-proof copper mesh. Rodents are persistent creatures that can tear and chew there way through many materials. For example, using caulk to close gaps is never enough. With the copper mesh firmly in place, this access point for mice has been permanently blocked.

This homeowner in East Brunswick, NJ had a bat infestation a while back. Our wildlife team had taken care of the issue and he had a bat warranty with us should there be a later re-infestation. This year, he decided it was time for a new roof. Given his bat issues in the past, he wanted us to come out to the home to make sure that there were no new entries into the home before replacing the roof. We were happy to help out. 

During my roof inspection, based on the earlier infestation and how the bats had gained attic access, I recommended that he consider installing Ridge-Guards over the ridge vents. Ridge vents are an important, necessary part of a home’s roofing system. These vents allow damp, warm air to escape from the attic, which increases the home’s energy efficiency and helps protect asphalt shingles from overheating and warping in the summer. Unfortunately, these vents come with a downside. They are often exploited by small wildlife, especially flying squirrels, bats, and sometimes mice, to gain attic entry.  

This homeowner did not even want to think about another bat infestation after what he had gone through. I recommended that he consider Cowleys for installing a Ridge-Guard system. A Ridge-Guard is a breathable protective cover that we install over the ridge vents. This covering guards against animal entry through the ridge vents. We’ve used this product for homeowners looking for an effective way to prevent bats and other wildlife from gaining access through the ridge vent instead of having to deal with the messy, and often expensive to fix, aftermath of a wildlife infestation.  

As a wildlife technician, I must admit that I enjoy the challenge of capturing and outsmarting wildlife. However, for homeowners, preventing potential wildlife issues from happening in the first place is a far better alternative to dealing with an actual infestation. Cowleys has a separate contractor division with an experienced construction crew that handles various homeowner services including repairs caused by wildlife. 

A South River homeowner was having issues with mice in her basement and kitchen, and she contacted Cowleys. I was immediately dispatched to take care of the problem. During my inspection, I concentrated on finding signs of mouse activity such as droppings, rub/grease marks along walls, and loose nesting materials. I am also concerned about locating potential access points. With small rodents like mice, this can present a challenge. These animals are even smaller than they look because of their fur. A house mouse weighs less than an ounce, and can fit through a hole as small as a dime. It is especially important to inspect around the home’s foundation, both indoors and out. Mice, looking to escape the harsh outdoor elements during the winter, often enter homes through the basement or crawl space. 

Sure enough, during  my perimeter inspection, I saw that a pipe entering the exterior of the home into the basement was not adequately sealed. The openings around the pipe’s edges perfect for a mouse — the only thing missing was a welcome mat! There was no doubt that mice were exploiting this opening. Their “business card” — their droppings — were all over. There were pellets sprinkled at the base of the entry point as well as inside the hole itself. 

I showed the homeowner the source of her problem, and explained to her how I was going to get rid of her rodent infestation. She was extremely grateful. First, I patched the area around the pipe with rodent chew-proof knitted wire copper mesh. It is critical to find and seal the entry points. If you don’t, you can set up all the traps you want inside your home, and you still won’t permanently resolve the problem. Finding these small, often hidden or overlooked holes is time-consuming back-bending work, and it helps to know what to look for. We tend to see the same “hot spots” for rodent entry. Fortunately, the area around the pipe was the only observed gap during my inspection. 

I also placed several snap traps in those areas inside the home where there were indications of high rodent activity. This will get rid of any mice that may be still be lurking about, and these traps will also allow me to gauge whether there is still activity when I return for my two-week follow-up. At that time, I’ll re-inspect the home and perform any additional treatments as needed.

I was recently sent to a home in Edison, NJ for a Cowleys home protection plan (HPP) scheduled service. The homeowner had issues with rodents around the home and I found out why she was concerned.

In my inspection, I found an exterior rodent bait station by the shed that was completely depleted from the last service. The interior rodent bait stations in the garage and crawl space were also empty.

After completing the service around the home I rebaited all the existing bait stations. I then performed a thorough inspection around the house to determine how the rodents were entering the structure. I found a sizable gap around the piping where the gas line was passing through the foundation. To close up this access point, I used a copper mesh material which does not rust or disintegrate like steel wool. 

Since this customer's rodent pressure was so high. I added an additional large rodent bait station (LP) to the exterior of the home.