Before & After Photos

Installation of the CleanSpace crawl space encapsulation system to keep humidity low.

Regraded the soil to direct water seepage to sump system. Removed all debris from the crawl space. Installed a SmartSump pump system with liner, cast iron pump, CleanPump Stand, airtight lid with airtight floor drain and WaterWatch alarm system. Installed a SmartDrain in crawlspace to identify future plumbing leaks. Installed a CleanSpace crawl space encapsulation system. Installed a CleanSpace Drainage Matting under CleanSpace liner. Installed a SaniDry Sedona to keep humidity low. Applied Mold-X2 Cleaner and
Botanical disinfectant to all exposed wood within the crawl space. Installed two wireless sensors in the crawl spaces which send temperature and humidity readings to a small panel inside the house. Installed a small pump to move water from the dehumidifier to the sump
pump or out of the crawlspace. Installed a separate dedicated circuit/outlet for the sump pump and for the dehumidifier. Installed an air ducting to the dehumidifier in order to properly distribute the dehumidified air throughout the crawl space.

Regraded the soil to direct water seepage to sump system. Removed all debris from the crawl space. Installed SmartPipe in crawl space. Around the perimeter of both crawl spaces, Installed SmartSump System and UltraSump Combination. This is the Sump
pump system with a Battery Failsafe, back up pump in case of power outages. Installed separate dedicated circuit/outlet for the sump pump. Installed two wireless sensors in the crawl spaces which send temperature and humidity readings to a small panel inside the house.

This homeowner recently purchased this home and had mold removed from the crawl space. He wanted to find a solution to prevent mold from returning. One of our System Designs Specialists, Darrin, inspected the crawl space and found evidence of moisture issues. Moisture issues in the crawl space can lead to mold growth not only in the crawl space, but throughout the entire home. Moisture in the crawl space can also lead to musty odors, cupping hardwood floors, increased allergies/asthma while at home, and sticking doors and windows. The only way to prevent these issues from occurring in a pier and beam home is to have a crawl space encapsulation system installed. 

Our Production Team completed this job by installing a drainage matting, CleanSpace moisture barrier, sump pump, and dehumidifier. They also closed off all outside air to the crawl space by sealing all vents and block walls. This turned the wet crawl space into a dry, conditioned area.

Customer's Encapsulation System had many problems, leaks from crawl space pipes, tears in the liner, Sump Pump problems. We were able to come in and alleviate all issues, and repair/replace the necessary pieces to bring the system back to the correct state. Before and After of Crawl Space.