Before & After Photos

Our client has a basement that is partially underground. This wall has been showing signs of water infiltration. It is the wall that is located below their garage and subgrade. The homeowner uses their basement for storage and as a workshop so they want the space to stay dry and clean, and not have to worry about moisture causing any mold, mildew, or musty odors in the space. 

Our team installed the Waterguard system, a track installed underneath the slab that along with the CleanSpace liner on the wall, diverts infiltrating water to the TripleSafe sump pump system with UltraSump Battery Backup. The system will keep water and moisture from entering the basement and with the battery backup, the homeowner can have peace of mind that even during storms, their home is protected. 

This basement had an existing sump pump that wasn't keeping it dry. The pump and basin sat in an open pit of water, that would back up into the basement. To help alleviate this, we installed a TripleSafe Sump Pump System. We cleaned the pit out and filled it with stone to keep mud away from the basin and pump. The TripleSafe Sump Pump System contains 3 pumps, a 1/3 HP pump, a 1/2 hp sump, and the UltraSump Battery Back-up. Together these pumps keep your basement dry. 

This basement has some concerns with water infiltration. In addition to a TripleSafe Sump Pump System, on the opposite side of the basement, we installed with SuperSump Pump System next to the water heater. The SuperSump Pump System which contains a 1/2 hp pump on a pump stand to keep it from clogging if any silt or sediment finds it's way into the pump basin. 

This basement had water seeping in around the perimeter. We installed the WaterGuard Drainage System to collect any water infiltration and direct it to a sump pump which would carry the water away from the home and to a spot on the property designated by the homeowner. 

Moisture and high humidity in this crawl space resulted in mold and mildew growth and damage to the insulation. The homeowner wanted to encapsulate the space, so our team set to work cleaning out the crawl space, air sealing vents, the rim band, sill plate, and any other openings through the foundation wall to the outside. They treated the microbial growth with an antimicrobial, installed a new CleanSpace Vapor Barrier, applied Foam Board insulation to the foundation walls, and installed a dehumidifier to regulate the relative humidity.