Before & After Photos

This customer had a humididty issue in the basement. We installed our BrightWall vapor barrier and our SaniDry Sedona dehumidifier. Now not only is the humidity under control but, the walls look cleaner and brighter.

After a history of water intrusion, our team installed a perimeter of our WaterGuard drainage system along with lining the walls with our CleanSpace vapor barrier wall system. A new Super Sump pump system was connected to the WaterGuard to keep the basement dry!

Water was always getting into this customers basement and in some areas they had standing water year round. Our solution to this problem was to install a Cleanspace vapor barrier, waterguard, SuperSump Pump and a battery back up.

This was a very tough low crawlspace with lots of dampness. We had to clean it out first and remove all the organic material.  Then we installed a drainage system with a SmartSump to deal with the water issues.  The floor and walls where covered with our Cleanspace Encapsulation System to keep the moisture from the ground from evaporating into the air.  The result is a transformed, dry, and safe crawlspace. 

This homeowner was having issues with excess moisture in his crawlspace and wanted us to turn it into a clean, dry, energy-efficient space. Here we did an encapsulation with our CleanSpace Vapor Barrier System. We started by installing a SmartPipe Crawlspace Drain System with a SuperSump Pump System to eliminate any flooding water. We then laid down CleanSpace Drainage Matting which helps direct any water toward the perimeter drain. The old, tattered insulation was removed and replaced with SilverGlo Thermal Insulated Wall Panels, along with spray foam which we added to the rim joist area. Lastly, we wrapped the piers and walls with our CleanSpace Liner.