Before & After Photos

A homeowner from Austin, MN, had recently learned about the dangers of radon gas and the risks it poses to households. She was concerned that radon gas could be in the air she and her family were breathing, so she decided to find a Minnesota radon mitigation specialist who could help. On the recommendation of a friend, he decided to sign up for one of our FREE estimates, and several weeks later, our Design Specialist was headed out to the home. 

When he arrived, he got right to work placing a continuous radon monitoring system, which works to collect radon levels in the home, reporting the average level after a certain time. Our Design Specialist explained that if the levels of radon came back higher than 4 pCi/Ls, he would recommend the installation of a radon mitigation system. A typical radon mitigation system consists of a large-diameter plastic pipe that connects the air beneath your foundation to the outdoors. An in-line fan sucks radon-rich air from beneath your foundation and expels this hazardous air to the exterior. Instead of entering your basement or other living space area through numerous gaps and cracks in the foundation, radon gas is extracted from beneath your foundation before it can permeate into interior space. When installed by an experienced radon mitigation specialist, a radon abatement system will lower the concentration of radon gas in your interior air to the minimal levels recommended by the EPA and other health and safety agencies. The homeowner agreed with our Design Specialists plan, but decided to wait until the levels returned to make a choice. Several days later, the results returned, indicating higher-than-normal levels of radon in the home. The homeowner called our Design Specialist to schedule the installation. 

On the day of the project, our Foreman, Geno M, and his team were able to successfully install the system. Now, our customer has peace of mind knowing that only the healthiest air is circulating in her home! 

A homeowner in Kasson, MN, noticed their basement was smelling musty. After doing a quick investigation, the homeowner discovered that sections of their carpet were damp. The homeowner did not want their problems to worsen, so they wanted to find a solution. Uncertain about who to work with, the homeowner asked a friend who had a similar issue. Their friend recommended working with us, American Waterworks. Trusting their friend's recommendation, the homeowner signed up for their FREE estimate. Once the estimate was set, the homeowner prepared for the arrival of Nick, one of our Design Specialists. Nick arrived at the home and the homeowner showed him to the problem area. After Nick did a thorough walk-through of the basement, he found the source of the water. Nick alerted the homeowner of his findings and recommended an action plan. The plan included installing a new drain system and sump pump. Knowing this was their best option, the homeowner agreed with Nick's suggestions. The plans were directed to our Foreman, Gabriel, and his crew and they traveled to the home. Once they arrived, Gabriel and his crew began installing the WaterGuard, our patented below-floor drain, around the perimeter of the basement. Next, the crew took out the old sump pump and replaced it with the TripleSafe sump pump. Then, the crew attached CleanSpace, a waterproof plastic vapor barrier, to the basement walls. To finish off the project, the crew attached an IceGuard, an anti-freeze fitting, on the outside discharge line. The crew swiftly completed the project and cleaned up their materials. The homeowner was grateful to know their basement was no longer at risk. American Waterworks is happy to waterproof another home. 

A happy customer from Pine Island, MN was so thrilled with the results of her first PolyLEVEL project, she is having us return at the end of Septemeber for another project.  In her first project, American Waterworks was challenged with closing a 3 inch void between the sidewalk and the concrete porch near the entrance of her home.   Within two hours, our Team had leveled the concrete slab using our trusted polymer foam injection services preventing any further settlement for years to come.  

One of our Pine Island, MN neighbor's contacted American Waterworks with concerns about their unlevel driveway and cracked concrete garage apron.  More specifically, Britt & Julie's garage door would not seal completely when closed, allowing water to seep into their parking space. American Waterworks used our trusted PolyLevel system to lift and level the concrete driveway slabs back to their original position and replaced the concrete garage apron to prevent any further water damage.   

Mr Reker reached out to us in July with concerns from all the heaving, cracking and uneven concrete he was noticing around his property in Mantorville, MN.  

American Waterworks was able to design a comprehensive plan to permanently lift and stabilize the sinking concrete slabs with a high-density polyurethane formula called PolyLEVEL.