Before & After Photos

Moisture in a crawlspace is never a good thing, and more often than not it will only get worse. Moisture will almost never leave a crawlspace by its own accord. Instead, water and moisture will begin to soak into things like the floor joists or the insulation in the crawlspace. Once this happens the chance for mold to grow increases significantly, causing even more problems. 

The "before" picture of this area shows off what it looked like when our System Design Specialist first went out to the home. This particular picture showed off the area around the water heater. In this area, there seems to be some damp ground in front of the water heater, as well as moisture underneath the plastic liner. Another big thing that may be missed is the fact that some insulation has fallen. In this case, the piece of insulation had absorbed enough water to make it heavy and cause it to fall down. 

The "after" photo shows the same area after our crew had been out to the home and installed the CleanSpace liner. This area looks extremely different and much better than before. This homeowner no longer has to worry about water and moisture causing issues in the crawlspace. they now have a clean, dry area under their home!

This crawlspace looks like the perfect location for a scary movie and that is not a compliment.  Dreary, decrepit and unvisited are a few words I would use to describe it.  Judging by the look of it, unsalvageable should be another word we could use. Fortunately, that is not the case for this Maggie Valley, North Carolina crawlspace.

It’s not the best looking thing in the word, but it certainly isn’t the worst. For a crawlspace with moisture issues, this is about average. The homeowner even tried to provide a barrier between the earth and crawlspace, but even that didn’t help. The plastic is too thin and it isn’t sealed into place. The insulation—if we can still call it that—has suffered a great deal from over exposure to moisture. Once that insulation becomes damp, it sags and is essentially useless. This means the insulation is basically just sitting there collecting water.

Now, let’s fast-forward to the present. Let’s fast-forward to the “after” image. See the difference? That poor, ill-fated insulation is removed. The original liner is gone, replaced with our sturdy CleanSpace. This liner has five times the thickness of the original liner. It’s white, clean, and is actually sealed this time. This liner is the barrier the crawlspace both needs and deserves. Now, if there’s ever actually a problem you won’t be afraid to venture down and investigate. You may even welcome it! Who knows?

The main thing is that All-Dry of the Carolinas was able to come to the rescue once again and bring a moisture free environment into this once chaotic, humid space.

This home in Arden, North Carolina had a very damp crawlspace which was in need of a CleanSpace liner, as well as a dehumidifier and sump pump. Between these three products, a crawlspace is usually pretty protected from moisture. However, because this problem wasn't addressed soon enough, we also had to clean the mold off of the floor joists and other areas using Mold-X.

The "before" photo shows the crawlspace's condition when our System Design Specialist first arrived at the home. As you can see, there is insulation falling down and already on the ground. The unprotected and uncovered ground lets a lot of moisture enter the crawlspace. This was one of the biggest problems for this homeowner.

The "after" photo gives a great view of the same area, which just happens to be where several of the products that we installed were located. First off, you have the CleanSpace liner. This liner provides great protection and a seal to keep the crawlspace separate from the open ground. We also have the SantaFe Edge II Dehumidifier, which is another quality product we provide. The dehumidifier essentially filters the air for any moisture and keeps the relative humidity low enough that mold cannot grow. The final product in this picture, that you can't see very well is the sump pump. The sump pump takes any water that collects under the CleanSpace liner or from the dehumidifier and pumps it outside the home.

This home in Arden, North Carolina had been badly damaged by moisture in the crawlspace. They had an old crawlspace liner that was not able to give them very much protection from moisture and mold. The moisture started to soak into the insulation in the crawlspace, as the insulation got heavier and heavier, it began to sag and eventually fall down. When the homeowner noticed this happening and saw the condensation (mainly under the old liner), they decided to give us a call. We were able to help this homeowner out tremendously by encapsulating their crawlspace.

The "before" picture shows the condition of the crawlspace before any work was done. As you can see, a lot of the insulation is sagging or has already fallen. This is a common sign of water intrusion and moisture problems under a home.

The "after" photo shows off our crew's amazing installation job. As you can see, all of the insulation was taken out of the crawlspace. This is because of how much moisture was in the insulation. If it would have been left, mold would have easily grown in the crawlspace. The old liner was removed from the ground and replaced with drainage matting and the CleanSpace liner. Our crew also scrubbed down the floor joists with MoldX, which destroys any mold and prevents future mold growth.

Here at All-Dry of the Carolinas, we cannot speak enough about how great of a product CleanSpace is! It’s durable, reliable, and very convenient. Crawl spaces of all shapes and sizes are able to be fitted with CleanSpace to encapsulate the space. No matter what type of issues that you are having in the crawl space, if it involves moisture, us at All-Dry of the Carolinas are able to handle it.

            In most crawl space situations, moisture invades the air from the ground. Crawl spaces are usually victim of dampness and ground water due to hydrostatic pressure. Hydrostatic pressure is when ground water is forced down by gravity until it is stopped by some type of force, which in these cases is a basement or crawl space wall. The water is then forced against this object until it forces its way through or around. When water begins coming into your home from underground, it is typically a result of this pressure.

            It is almost impossible to completely stop this amount of water intrusion, but there are ways to prepare for it so it doesn’t affect your home. This home in Arden, NC was experiencing ground moisture due to hydrostatic pressure. The homeowners called us at All-Dry of the Carolinas to help them with their problem so we send out our design specialist, David Listovitch, to give the space a look.

            David noticed large amount of moisture in the crawl space that was affecting the home. To stop this issue, David recommended CleanSpace to keep the moisture from getting into the air. This is where the magic of CleanSpace comes in handy. This crawl space was oddly shaped, yet CleanSpace was able to wrap around all the walls, floors, and piers.

            In the pictures you can see how this product is very convenient in waterproofing crawl spaces and preventing ground moisture from damaging the house. Along with CleanSpace, this crawl space was equipped with a SmartSump pump and dehumidifier to protect the home from high moisture levels.