Before & After Photos

We installed six piers onto this houses foundation in order to keep the foundation from shifting any further and causing more cracks. 

This home had stair-step cracking in the bricks on the front side of the house. This type of cracking occurs when their is suspected foundation settlement issues, which is what we diagnosed. We fixed the settlement issues by installing piers under the footer of the home. We were even able to lift the footers using hydraulics through the piers. This house won't settle any more on the front side. 

When a bowing block basement wall has less than two inches of deflection, we can stabilize it with our CarbonArmor system. Carbon armor is the perfect wall reinforcement system because it is, minimally invasive, has a quick installation time, and is super strong. We first sand the walls to make sure our epoxy glue gets deep into the pores of the concrete for ultimate strength. We then apply the epoxy over the wall and adhere it to the carbon reinforcement strip. After we glue the carbon strip to the wall, we then configure the ArmorLock, which is how we configure the system to the rim joist and sill plate. Carbon Armor is the perfect solution for minimally bowed block walls!

This home had floor joists that were rotting from years of exposure to moisture. We installed SmartJacks to ensure the floor joists are held up properly. 

This crawl space's main beams were in need of some support because the floor above had a lot of weight pressing down and causing wear and tear on the beams. We supported the beams by installing SmartJacks in the crawl space, connected to the main beams.