Before & After Photos

In Dixon, KY, under the concrete floors of the basement, there was water pressure and in return, it created a crack on the floor. Whenever it rained, the homeowner noticed that it would get worse and start to puddle on the floor. The crack was located in the middle of the room, so it was caused by hydrostatic pressure. Hydrostatic pressure is pressure from a body of water at rest. The weight of the water itself is what causes the pressure. If the void space in the soil outside your foundation is filled with water, it will cause hydrostatic pressure to push the water into your basement. 

To repair the gnarly crack, a lateral line drainage system is created. Starting at the crack, a drainage channel is installed. After removing a section of the basement floor, a PVC is run underneath that leads to the sump pump. After the drain is installed, it is backfilled with stone and fresh concrete is pushed over. After three days of allowing the concrete to cure, the homeowner was pleased to know that their basement would not be an issue the next time it rained. 

A basement in Evansville, IN needed waterproofing, done to their basement when the homeowner began to have aggravated allergies and found that it could be from the basement. The bottoms of the basement walls consisted of mold spores and small water puddles on the ground. The humidity and dampness of the basement had created a thriving environment for the mold to grow, but a nightmare for the homeowner. Some mold spores produce a chemical byproduct called mycotoxins. This is a type species of mold that will compete for space with other species and in return, create chemical warfare on other molds. Having mycotoxins exist in your own home can affect your respiratory system.

Although you can not see the spores, they will leave a musty smell. To remove any mold from the basement, it has to go through mold remediation. Any mold spots are scrubbed and sprayed thoroughly. After mold remediation is completed, the homeowners have a choice as to whether or not they want annual maintenance done to monitor the area. The basement was waterproofed using CleanSpace, which will protect the vapor barrier. A WaterGuard system and TripleSafe sump pump are put in to guarantee that no water would be entering the basement. With a mold-free, water-free basement, it thrilled the homeowner to know that their health would not be at risk. 

A homeowner had someone inspect their crawl space located in Evansville, IN, and had the air quality tested. When the air quality resulted lower than expected, the homeowners were encouraged to reach out to us regarding mold remediation. There was visible mold throughout the wooden beams of the crawl space. Mold is a fungus that eats organic matter. It likes temperatures between 32 and 100 degrees F and relative humidity between 70% and 99%. Mold is typically found in places that are damp or humid for an extended amount of time, just like the crawl space!

Only through proper mold remediation will banish mold for good. Replacing wooden beams that were affected by mold may help the appearance of a space, but the problem will occur again if the root of the cause is not dealt with. Installing a SaniDry Sedona will create a dry airflow throughout the crawl space, preventing mold from growing. Any openings of the crawl are closed tightly. All wooden beams are treated for mold and visible mold is scrubbed off. Treating and preventing mold ensures that the homeowner and their home will be safe.

In Evansville, IN, a homeowner had dealt with a leaky basement and wanted to take care of the problem before it worse anymore. The floor had visible signs of water leakage such as water puddle stains on the ground and water stains along the corners of the walls. If this issue is not dealt with, it can turn into mold, which is not an ideal situation for any homeowner. The homeowner was excited to move forward in creating their dream, safe place. 

The solution to damp and leaking stone walls such as the home here is to put CleanSpace alongside the walls. CleanSpace wall system stops water vapor drains wall leaks and brightens your basement. It also has an antimicrobial additive manufactured into the material, which prevents mold growth on the liner. Any water that is finding its way into the basement walls, will flow beneath the CleanSpace, down to the WaterGuard that is installed in the ground beside the walls. The water that enters the WaterGuard is then directed to the sump pump. The sump pump will pump out water to the outdoors. This effective system pleased the homeowner to know that water would not be an issue any longer. 

In Evansville, IN, a homeowner needed a functional system to control the water that was escaping into the basement. As the rain weather carried on, the problem gradually became worse, requiring the homeowner to reach out to us about their concerns. A basement that leaks water becomes useless since it's unsafe to store keepsake items or furniture without it being ruined. The homeowner was ready to transform the unusable space into a livable and safe place. 

A small trench was formed alongside the walls for the WaterGuard to go into. The WaterGuard sits on top of the footing and is designed not to clog. This is an important feature because it keeps mud from getting into the drain. The next system that was installed was the UltraSump pump. The UltraSump pump is not only made up of a sump but other helpful features. The sump system has an airtight sump lid, floor drain in the sump lid, pump stand, and a pump alarm.