Skip to main content
Got a wet basement? Musty odors? Protect your home with our proven solutions & lifetime warranty.

A dry, healthy home starts here.
Contact your local dealer or call 1-800-638-7048

Zip code 43215

Your Local Dealer is

Mid-State Basement Systems

Before & After Photos

Click on a photo to enlarge.

Drainage system and SmartSump added to crawlspace in Anderson, SC

When water comes into your crawlspace there are several different ways to remove the water. In this crawlspace in Anderson, SC, water was flooding in during heavy rains.  In the “before” picture you see a bare crawlspace with a trench dug around the perimeter. This trench was made to fit in our 3 inch drain tile. This draining system is three inches in diameter and is placed under the soil. Whenever water tries to enter the crawlspace again, the water will enter the draining system and be guided to the SmartSump pump to be flushed from the crawlspace. The “after” picture shows the draining system anchored down by rocks and leading to the SmartSump.

Basement in Anderson, SC Waterproofed with WaterGuard Drain and CleanSpace Liner

Unfortunately, there are many basements that are plagued with water intrusion. There are a number of different ways that this water may be getting into the basement, but we know of one surefire way of keeping it out! Our systems have been installed in thousands of homes and these homeowners have been pleased at the results! While we hate that many homes are dealing with these issues, we are glad that we can provide a solution to them!

This homeowner was having some serious water intrusion in their basement, enough that some of the wood making up the stairs was beginning to deteriorate. The homeowner called knowing that this could certainly be a serious issue. Our System Design Specialist was able to diagnose the problems that were going on in the basement, and provide the perfect solution for the home.

The after picture gives a great view of some of the work that was done in the basement of this Anderson, SC home. The two biggest things were the installation of the CleanSpace liner and the WaterGuard, which cannot be seen well in this photo. The CleanSpace was installed along the walls of the basement in order to help catch and bring the water to the WaterGuard that was installed. WaterGuard is a drain that was installed along the perimeter of the basement floor in order to catch any and all water that was coming through.

TrenchDrain Installation in Eastanollee, GA

The home was having issues with water getting into the basement, which was causing the homeowner a lot of headaches. One of the main places that the water was getting into the basement from was the door leading into the basement. This is a pretty common issue that homeowners have and we often have to put a TrenchDrain in front of the doors, which is exactly what the case was with this basement.

In the "before" picture you can see the open door where a lot of the water was getting into the basement. The door wasn't getting a proper seal, and since it was below the ground level, the water was easily getting into the basement. While there were other areas in the basement with water intrusion issues, this one was the most severe and caused the most problems during heavy rains.

The "after" photo showed how we were able to help out with the problem. Although it may look like we only put a small drain in, we actually did more than that and it's harder to notice if you weren't paying attention to the first photo. Our crew actually took out that last concrete step and graded the yard in front of the door. That by itself is a pretty significant improvement because now the water doesn't have a path to run directly to the door to pour down on it. The other thing we did though was the TrenchDrain. This drain goes right in front of the door so that any water that does actually get into the basement is immediately caught and drains to the sump pump.

CleanSpace in Eastonolle, GA crawlspace

When it comes to your crawlspace, protecting it from moister is very important. In this home the crawlspace was taking on large amounts of moister. Not only was moister the problem, but the crawlspace was littered with debris, trash, and an old liner.  To solve this problem, our All-Dry of the Carolinas team encapsulated the entire crawlspace.

As you can see in the before picture, the crawlspace floor is covered with dirt and it looks as if the opening in the wall might be a challenger to wrap in CleanSpace. But it is obvious in the after picture that wrapping that area wasn’t a problem for our All-Dry of the Carolinas Team!

Belton, SC Crawl Space total encapsulation

This home in Belton, SC was experiencing water issues in their crawlspace. Because of the puddling of water in the crawlspace, mold had begun to form in areas. The mold caused weakening of the foundation which caused the floor joist to begin to sag.

To solve this problem our All-Dry team had to follow many steps, first the mold needed to be removed. Our All-Dry of the Carolinas Team used Mold-X, this product not only kills existing mold, but prevents further growth.

Once the mold issue was tackled, our team used a series of our waterproofing technology to save the home from the water effects in the crawlspace. To begin, CleanSpace liner was added to the crawlspace. CleanSpace is a 20 mil tick liner that is laid across the basement floor and wrapped around walls and piers. This liner works as a barrier to keep moister that is produced from the ground of the basement. In this specific case, the CleanSpace was just placed on the walls; this was to hold in moister that came from the water that dripped down the walls when entering the basement. Once the CleanSpace Wall was installed our All-Dry crew installed our SuperSump pump, which is a pump system that can flush up to 2,650 gallons of water per hour from the basement.

Once the waterproofing products were down, our team installed SmartJacks. The SmartJacks were placed under the floor joist of the home and then used to push the floors back into place. To install it, we excavate a two-foot cube at each SmartJack location. The hole is then filled with concrete or engineered to create a stable, loadbearing footing. The SmartJack sits on top of it with a custom-engineered base to prevent the support system from sinking when the moister starts to affect the soil. SmartJacks are then adjusted to the perfect position to support the floor joist of the home. This SmartJack technology, is made of steel which will not rust when exposed to moister and it can also hold over 60,000 pounds! This product was able to save this homes sagging floor problem.

With the combination of All-Dry’s different products, this crawlspace in Belton was thankfully saved.

get a free estimate
Find Local Dealer
Free Quote